LAXGoals

Home

Specs & Features
About Us
Go to SoccerGoals.com
 
 
GUARANTEE
Since 1991:
45-day, unconditional, purchase price refund.  2-year, components & materials guarantee on all our products.

 
 

All Pages are designed to be printed.

This web site contains our most up-to-date product information & pricing.

GOAL

LAXGoal Assembly Instructions
 
LAXGoal Components
The LAXGoals you purchase from us are complete. All you need is a hammer!
LAXGoal components (from top of image to bottom) are:
  • 2 each, Curved Horizontals (with net attached)
  • 1 each, Blue Carrying Case
  • 1 each, Yellow (ABS) Peg
  • 2 each, H-Base prongs (zinc plated)
  • 2 each, 10-inch spikes (zinc plated)
  • 2 each, Verts (43-inch tubing)
  • 2 each, Vert Risers (27-inch tubing)
  • 1 each, Horizontal Connector (14-inch tube)
  • 2 each, Struts (zinc plated), hooked end

LAXGoal Components

Assembly Step 1
Connect the curved horizontals using 14-inch connector. Next, imbed the two H-Base prongs in alignment with curved tube ends

Assembly Step 1

Assembly Step 2
Place 43-inch Verts over H-Bases, then insert the shorter Vert Risers atop the Verts. (Make sure the yellow Interactive Goal label is ABOVE the hole drilled into the Vert's side.)

Assembly Step 2

Assembly Step 3
Place Horizontal assembly atop the Vertical assembly. Next, insert Strut's hooked curved end into the Vert's hole. Start with the Strut UP (as shown), then let the hook rotate inside the Vert. The Strut base will drop to the ground.

Assembly Step 3

Assembly Step 4
Anchor Strut bases using 10-inch spikes. Pull back the bottom center of the net. Anchor the net's base using the yellow (ABS) peg.